Poly(lactic acid). Группа авторовЧитать онлайн книгу.
to have a T m of 191°C. The high T m for the latter PLA was believed to result from stereocomplex formation of synthesized stereoblock PLA. The work using aluminum catalysts in stereoselective polymerization has continued [133,170–172], and other metal complexes have been utilized as well [158, 164,173–175]. Many of the studies, though, were conducted only in solution; therefore, the selectivity of the catalyst in, for example, melt polymerization remains unclear. A review including discussion on the stereocontrolled ROP of rac‐ and meso‐lactides has been published [176].
Metal‐free catalysis of ROP was reviewed [177, 178]. Both organocatalytic (nucleophilic, cationic, and bifunctional) and enzymatic approaches were discussed.
3.4.3.3 Post‐Polymerization Treatments
Post‐polymerization treatments for PLA prepared by ROP are strongly related to the processing and processability of the polymer. The processing of PLA is more demanding than that of commodity plastics due to the hygroscopic nature and the limited melt stability that can lead to hydrolytic degradation. The post‐polymerization treatments can mainly be divided into those performed in the melt as a finishing process or those done as a subsequent and independent processing step. Excluded from this review are post‐polymerization treatments involving simple polymer modification by the use of processing aids and other additives. The processes performed in the melt that are described in the literature are mainly focusing on improving the melt stability and the processability. Catalyst deactivation is one important feature that has been applied to PLA. Deactivators used include phosphorous‐containing compounds [179–181], nitrogen‐containing compounds [182], antioxidants [183], acrylic acid derivatives [184], and organic peroxides [185, 186]. The catalyst deactivation is generally performed in combination with a lactide removal process, which can be done by removing the low M w material at low pressures and at a temperature sufficiently high for distillation (devolatilization) [187, 188]. This process has been further developed by applying an inert gas flow in addition to the reduced pressure, which enables improved removal of the unreacted lactide [189]. The recovery of lactide has also been integrated in the polymerization process of new PLA as a means for improving the efficiency in the manufacturing chain [190]. Another way for reducing the lactide content of PLA is to apply solid‐state polymerization of the residual lactide containing PLA below its T m, which besides reducing the residual lactide content also increases the molecular weight of the polymer [191].
Separate post‐polymerization treatments of PLA have also been described in the literature. Drying of the polymer is generally done before processing to minimize the thermohydrolysis and molecular weight reduction during the melt processing. Suggested drying conditions for crystallized PLA is in the temperature range of 65–90°C, using dehumidified air with a dew point of −40°C [192]. More recently, the end‐of‐life options of bio‐based polymers have been brought into sustainability discussions. For PLA, this can be seen in the form of a number of suggested approaches on how to deal with waste materials from the polymerization process, the manufacturing process of end products, or the end product after its use. Converting of PLA into lower‐molecular‐weight polymers has been described, as well as the complete hydrolysis of the polymer into LA for use as new building blocks for either biosolvents or polymers [193–195].
REFERENCES
1 1. H. Tsuji, Y. Ikada, Macromol. Chem. Phys. 1996, 197, 3483–3499.
2 2. J. Huang, M. S. Lisowski, J. Runt, E. S. Hall, R. T. Kean, N. Buehler, J. S. Lin, Macromolecules 1998, 31, 2593–2599.
3 3. A. Södergård, M. Stolt, Prog. Polym. Sci. 2002, 27, 1123–1163.
4 4. I. Ajioka, K. Enomoto, K. Suzuki, A. Yamaguchi, J. Environ. Polym. Degrad. 1995, 3, 225–234.
5 5. S.‐I. Moon, C. W. Lee, I. Taniguchi, M. Miyamoto, Y. Kimura, Polymer 2001, 42, 5059–5062.
6 6. K. Hiltunen, M. Härkönen, J. V. Seppälä, T. Väänänen, Macromolecules 1996, 29, 8677–8682.
7 7. BCC Research LLC, Staff Report. PLS025G biodegradable polymers: global markets and technologies through 2022, BCC Research, Report Code PLS025G, June 2018, ISBN: 978‐1‐62296‐759‐9, 2018.
8 8. R. K. Kulkarni, K. C. Pani, C. Neuman, F. Leonard, Arch. Surg. 1966, 93, 839–843.
9 9. A broad range of standard, custom and specialized biodegradable polymers for medical applications. Available at https://healthcare.evonik.com/en/medical‐devices/biodegradable‐materials/resomer‐portfolio (accessed date 18 April 2021).
10 10. We make Ingeo, a new material for plastics & fibers with unique properties that all begin with greenhouse gases. Available at https://www.natureworksllc.com (accessed date 5 May 2021).
11 11. Ingeo in use. Available at https://www.natureworksllc.com/Ingeo‐in‐Use (accessed date 18 April 2021).
12 12. Applications & solutions. Available at https://www.total‐corbion.com/applications‐solutions/ (accessed date 18 April 2021).
13 13. Bioplastics market data. Available at www.european‐bioplastics.org/market/ (accessed date February 16, 2021).
14 14. About total Corbion PLA. Available at https://www.total‐corbion.com/about‐total‐corbion‐pla/ (accessed date 18 April 2021).
15 15. Total Corbion PLA announces the first world‐scale PLA plant in Europe. Available at https://www.total‐corbion.com/news/total‐corbion‐pla‐announces‐the‐first‐world‐scale‐pla‐plant‐in‐europe/ (accessed date 18 April 2021).
16 16. Bioplastics Magazine 2020, 15(4), 24–25.
17 17. K. K. Jem, B. Tan, Adv. Ind. Eng. Polym. Res. 2020, 3, 60–70.
18 18. Bioplastics Magazine 2017, 12(04), 36–37.
19 19. S. Kéki, I. Bodnár, J. Borda, G. Deák, M. Zsuga, J. Phys. Chem. B 2001, 105, 2833–2836.
20 20. N. M. Qureshi, B. Woodfine, EP 0,937,743, 1999 (to Kobe Steel).
21 21. A. Duda, S. Penczek, Macromolecules 1990, 23, 1636–1639.
22 22. D. K. Yoo, D. Kim, D. S. Lee, Macromol. Res. 2005, 13, 68–72.
23 23. Y. M. Harshe, G. Storti, M. Morbidelli, S. Gelosa, D. Moscatelli, Macromol. Symp. 2007, 259, 116–123.
24 24. G. X. Chen, H. S. Kim, E. S. Kim, J. S. Yoon, Eur. Polym. J. 2006, 42, 468–472.
25 25. S.‐I. Moon, C. W. Lee, M. Miyamoto, Y. Kimura, J. Polym. Sci. Part A 2000, 38, 1673–1679.
26 26. H. Maruyama, T. Murayama, N. Yanagisawa, N. Tsuzaki, EP 0,848,026, 1998 (to Kyowa Yuka).
27 27. Y. H. Kim, K. D. Ahn, Y. K. Han, S. H. Kim, J. B. Kim, U.S. Patent 5,434,241, 1995 (to Korea Institute of Science and Technology).
28 28. A. Södergård, M. Stolt, EP 1,525,249, 2005 (to Tate & Lyle Public Limited Co.).
29 29. N. Yanagisawa, T. Nezu, K. Hotta, T. Murayama, N. Tsuzaki, S. Kodama, H. Maruyama, Y. Yokomori, EP 0,823,448, 1998 (to Kyowa Hakko Kogyo).
30 30. K. Miyazaki, H. Noguchi, T. Ota, A. Kasai, H. Yamaoka, EP 0,792,901, 1997 (to Mitsubishi).
31 31. S.‐I. Moon, I. Taniguchi, M. Miyamoto, Y. Kimura, C. W. Lee, High Perform. Polym. 2001, 13, 189–196.
32 32. Y. Terado,