Obed Hussey, Who, of All Inventors, Made Bread Cheap. VariousЧитать онлайн книгу.

      (From An Old Print)

      The First Machine

      The following is also copied from "Memorial of Robert McCormick," published by Leander J. McCormick in 1885:

      TO THE CONGRESS OF THE UNITED STATES

      "REMONSTRANCE"

      "Of the Citizens of New York against the renewal of Letters Patent granted to Cyrus H. McCormick, June 21, 1834, for improvements in the Reaping Machine.

      "Among the early reaper inventors of this country, Mr. Obed Hussey, now of Baltimore, stood for many years deservedly the most prominent, and he has doubtless by his genius and indefatigable exertions (although in a modest way) contributed more to the advancement of this invention than any other man. He first tested his machine in 1833, and took out a patent for it the 31st of December of that year.

      "He first constructed his machine with a reel to gather the grain up to the cutters, and throw it upon the platform; but on trial, with his cutter, he thought it unnecessary and only an incumbrance, and, therefore, threw it aside and has never used it since. The main frame-work containing the gearing was suspended on two wheels about three feet four inches in diameter. The platform was attached to the rear of this frame, and extended out one side of it say six feet. The team was attached to the front end of the frame and traveled at the side of the standing grain as in Randall's machine. The cutting apparatus was pretty much the same as now used in Hussey's machine. The knife is constructed of steel plates, riveted to a flat bar of iron. These plates are three inches broad at the end where they are riveted to the bar, and four and a half inches long, projecting in front, and tapering nearly to a point, forming what is described as a saw with very coarse teeth, which are sharp on both edges. This cutter is supported on what he terms guards, which are attached to the front edge of the platform or cutter-bar (as termed by Hussey), one every three inches the whole width of the machine, projecting horizontally in front about six or eight inches. These guards have long slots through them horizontally through which the cutter vibrates, and thus form a support for the grain whilst it is cut, and protect the cutter from liability to injury from large stones and other obstructions. The cutter is attached by means of a pitman rod to a crank, which is put in motion by gearing connecting with one or both of the ground wheels as may be desired, according to circumstances, which gives to the cutter as the machine advances, a quick vibrating motion; and each point of the cutter vibrates from the centre of one guard, through the space between, to the centre of the next, thus cutting equally both ways. As the machine advances, the grain is readily cut, and the butts are carried along with the machine which causes the tops to fall back upon the platform without the aid of the reel. The grain to be cut was separated from that to be left standing by means of a point projecting in front of the cutter, in the form of a wedge, bearing the grain both inwards and outwards, with a board set edgewise upon it, sloping downwards, to a point in front. The grain was raked from the machine by a man riding upon it, in rear of the frame, at the side of the cutter, nearly in range with the guards, with his back towards the team, sometimes at the side and sometimes behind the platform. Soon after this date Mr. Hussey changed the construction of his machine somewhat, used one large ground wheel instead of two, placed the platform alongside the frame, and placed his raker on a seat by the side of the large ground wheel, facing the team, and raked the grain off in rear of the platform.

      The Most Practical

      "This was for many years doubtless the most practical reaping machine known, and, with the improvements that have been made upon it, from time to time, it is now preferred to any other in many wheat growing sections of the country."

      Mr. Hussey's Plea

      The fact and intensity of Mr. Hussey's struggles may, in part, be gathered from his letter to Edward Stabler, dated March 12, 1854:

      "Baltimore, March 12, 1854.

      "My Esteemed Friend, Edward Stabler:—

      "I think the work goes bravely on. I am unable to express my estimation of thy disinterested efforts; I never before experienced anything of the kind; it seems entirely new to me to have any one go out of their way so much, to do so much for me. I am not so much surprised at the progress thee makes considering the man, as I am that any man could be found to do me such a service. I hope thee will not get weary; I am sure thee will not. I hope the Committee will not act so unjustly as to turn their backs on all cases because there is 'rascality' in some; because there is rascality in some cases, why should a just cause suffer? The facts in my case can be easily proved. I made no money during the existence of my patent, or I might say I made less than I would have made if I had held an under-clerk's position in the Patent Office; I would have been better off at the end of the 14 years if I had filled exactly such station as my foreman holds, and got his pay, and would not have had half the hard work, nor a hundredth part of the heart-aching. I never experienced half the fatigue in rowing after a whale in the Pacific Ocean (which I have often done) as I experienced year after year for eighteen years in the harvest field, I might say twenty years, for I worked as hard in England as I do at home, for in the harvest, wherever I am there is no rest for me. If I am guilty of no rascality why should I not be compensated for toiling to introduce an invention which I thought to be of so much advantage to the World. I know I was the first one who successfully accomplished the cutting of grain and grass by machinery. If others tried to do it before me it was not doing it; being the first who ever did it, why should I be obliged to suffer and toil most, and get the least by it? No man knows how much I have suffered in body and mind since 1833, on account of this thing, the first year I operated it in Balto. Three years after I cut the first crop, I could not go to meeting for many weeks for want of a decent coat, while for economy I made my own coffee and eat, slept in my shop, until I had sold machines enough to be able to do better; there was no rascality in all that. My machines then cost me nearly all I got for them when counting moderate wages for my own labour. The Quaker who lent me the ninety dollars ten years afterward would not then (ten years before) trust me for iron, one who was not a Quaker did. There is one thing not generally understood; thou will remember the trial at Lloyd's, thou remembers also that I received the purse of 100 dollars; now what would the world suppose I would do? Why that I would do like the flour holders, keep the price up! But it is a fact and can be proved, that after it was announced to me that the verdict was in my favor I said to a gentleman now I will reduce my price 10 dollars, on each machine, and I did it, from that hour and did not breathe my intention until after that decision was announced to me! Where is the man who has done the like under similar circumstances? There is no 'rascality' in that. Now I do not believe that there is a reaper in the country (which is good for anything) at so low a price as mine, and not one on which so little profit is made.

      "I will inclose a pamphlet which I suppose thee has already seen—it may be useful.

      "Thy friend,

      (Signed) "OBED HUSSEY."

      Mr. William N. Whitely, an early inventor and manufacturer of harvesting machinery, who was for many years the king of the reaper business, and who fought the Hussey extension "tooth and nail," on January 8, 1897, wrote to the "Farm Implement News" upon the subject of McCormick's portrait on the silver certificates, then about to be issued, in which he refers also to Mr. Hussey, as follows:

      From the Pen of a Hussey Opponent

      "Editor 'Farm Implement News':

      "Having been informed that the bureau of engraving and printing was preparing new $10 silver certificates to be ornamented by the busts of Whitney, the inventor of the cotton gin, and C. H. McCormick, 'inventor of the reaper,' I write you to say that it would manifestly be unjust to credit the invention of the reaper to any one man. Mr. McCormick does deserve great credit for his enterprise and business skill in the many years he was engaged in manufacturing harvesting