Эротические рассказы

Fundamentals of Aquatic Veterinary Medicine. Группа авторовЧитать онлайн книгу.

Fundamentals of Aquatic Veterinary Medicine - Группа авторов


Скачать книгу
(hydrogen ion) that water can absorb (buffer) before achieving a designated pH. Total alkalinity is expressed as milligrams per liter or parts per million calcium carbonate (mg/l or ppm CaCO3). It consists of negatively charged bases – carbonates, bicarbonates, and hydroxides. Alkalinity is expressed in equivalent concentrations of calcium carbonate.

      1.3.2.10 Hardness

      Hardness refers to the concentration of divalent cations (calcium, magnesium, and sodium). Water hardness is important to fish culture and is a commonly reported aspect of water quality. It is also expressed as the calcium carbonate equivalent concentration. The same carbonate rocks responsible for most of the alkalinity are the main sources of calcium and magnesium cations for hardness. Hardness may be an index of potential pond productivity. The minimum hardness for fish is 20 ppm and optimum hardness is around 100 ppm.

      Hardness is traditionally measured by chemical titration. The hardness of a water sample is reported in milligrams per liter as calcium carbonate (mg/l CaCO3). Calcium carbonate hardness is a general term which indicates the total quantity of divalent salts present and does not specifically identify whether calcium, magnesium and/or some other divalent salt is causing water hardness. If limestone is responsible for both hardness and alkalinity, the concentrations will be similar, if not identical. However, where sodium bicarbonate (NaHCO3) is responsible for alkalinity, it is possible to have low hardness and high alkalinity.

      1.3.2.11 Conductivity, Salinity, Total Dissolved Solids

      Conductivity is a measure of water’s capability to pass an electrical current. This ability is directly related to the concentration of ions in the water (US Environmental Protection Agency, 2016). These conductive ions come from dissolved salts and inorganic materials such as alkalis, chlorides, sulfides and carbonate compounds (Miller et al., 1988). Compounds that dissolve into ions are also known as electrolytes (Sommer and Spitzer, 2004). The more ions that are present, the higher the conductivity of water. Likewise, the fewer ions that are in the water, the less conductive it is. A sudden increase in pond conductivity can indicate pollution. Agricultural runoff or a sewage leak will increase conductivity due to the additional chloride, phosphate, and nitrate ions.

      Salinity is a measure of the total concentration of dissolved solids, usually in parts per thousand (ppt). Anions (negatively charged) are chloride, sulfate, bicarbonate and bromide. Cations (positively charged) are sodium, magnesium, calcium, potassium, and strontium. Sodium and chloride are the major solids. Because the electrolytes form ionic particles as they dissolve, each with a positive and negative charge, salinity is a strong contributor to conductivity. The concentration of water is as follows:

       Freshwater: less than 2 ppt

       Brackish water: 2–16 ppt

       Saltwater: 35 ppt.

      The sum of all ion particles that are smaller than 2 microns (0.0002 cm) is the total dissolved solids. This includes all the disassociated electrolytes that make up salinity concentrations, as well as other compounds such as dissolved organic matter. Freshwater aquasystems should have less than 2000 mg/l of total dissolved solids and most water sources should have much less than that (American Public Health Association et al., 2017).

      1.3.2.12 Light, Color, Vibration and Noise

      Aquasystem water color influences microplankton growth, which can affect the stability of the water chemistry. Water clarity can affect fish. If fish that prefer turbid waters (e.g., bullhead, catfish, walleye) are cultured in relatively clear water they will experience stress; survival and growth will be adversely affected. Intensive aquaculture systems, particularly recirculating systems, utilize equipment such as aerators, air and water pumps, blowers, and filtration systems that inadvertently increase vibration and noise levels in fish culture tanks (see also vibration and noise in Chapter 10). Field and laboratory studies have shown that fish behavior and physiology can be negatively impacted by intense sound. Chronic exposure to aquaculture production noise could therefore cause increased stress, reduced growth rates, and cold feed conversion efficiency, and decreased survival. In the wild, geological and geophysical exploration, pile driving, drilling, dredging, and vessel traffic all produce manmade noise and vibrations, which may have negative effects on native fauna, which may range from physiological and behavioral effects to physical damage.

      1.3.2.13 Greenhouse Gases and Climate Change

      Elevation of carbon dioxide in the atmosphere leads to acidification of our water. This change affects all aquatic life. Millions of dollars are lost each year on decreased growth and increased mortality due to large fluctuations in the pH and temperatures of the water. Elevation in the CO2 levels of the atmosphere push the chemical reaction:

      to move more toward a disassociation of water molecules and increase the HCO3. In the ocean, this fluctuation is well buffered by salt water, but in coastal areas and rivers the addition of runoff increases the nitrogen, carbon and Ca2+, creating large fluctuations in the pH. Climate change has resulted in an increase of the ocean temperatures, changes in mixing and increased intensity of storms globally. These changes, together with large fluctuations in pH, result in large hypoxic zones and the inability of fish to acclimate to them.

      The increased CO2 in the plasma has been shown to affect the metabolic rate and the formation of CaCO3+. This occurs when HCO3 is secreted into the intestinal lumen. This secretion stimulates


Скачать книгу
Яндекс.Метрика