My Life and Work. Генри ФордЧитать онлайн книгу.
with a hole cut in it. That might be easy to make but it would be inconvenient to wear. A blanket does not require much tailoring, but none of us could get much work done if we went around Indian-fashion in blankets. Real simplicity means that which gives the very best service and is the most convenient in use. The trouble with drastic reforms is they always insist that a man be made over in order to use certain designed articles. I think that dress reform for women—which seems to mean ugly clothes—must always originate with plain women who want to make everyone else look plain. That is not the right process. Start with an article that suits and then study to find some way of eliminating the entirely useless parts. This applies to everything—a shoe, a dress, a house, a piece of machinery, a railroad, a steamship, an airplane. As we cut out useless parts and simplify necessary ones we also cut down the cost of making. This is simple logic, but oddly enough the ordinary process starts with a cheapening of the manufacturing instead of with a simplifying of the article. The start ought to be with the article. First we ought to find whether it is as well made as it should be—does it give the best possible service? Then—are the materials the best or merely the most expensive? Then—can its complexity and weight be cut down? And so on.
There is no more sense in having extra weight in an article than there is in the cockade on a coachman's hat. In fact, there is not as much. For the cockade may help the coachman to identify his hat while the extra weight means only a waste of strength. I cannot imagine where the delusion that weight means strength came from. It is all well enough in a pile-driver, but why move a heavy weight if we are not going to hit anything with it? In transportation why put extra weight in a machine? Why not add it to the load that the machine is designed to carry? Fat men cannot run as fast as thin men but we build most of our vehicles as though dead-weight fat increased speed! A deal of poverty grows out of the carriage of excess weight.
Some day we shall discover how further to eliminate weight. Take wood, for example. For certain purposes wood is now the best substance we know, but wood is extremely wasteful. The wood in a Ford car contains thirty pounds of water. There must be some way of doing better than that. There must be some method by which we can gain the same strength and elasticity without having to lug useless weight. And so through a thousand processes.
The farmer makes too complex an affair out of his daily work. I believe that the average farmer puts to a really useful purpose only about 5 per cent of the energy that he spends. If any one ever equipped a factory in the style, say, the average farm is fitted out, the place would be cluttered with men. The worst factory in Europe is hardly as bad as the average farm barn. Power is utilized to the least possible degree. Not only is everything done by hand, but seldom is a thought given to logical arrangement. A farmer doing his chores will walk up and down a rickety ladder a dozen times. He will carry water for years instead of putting in a few lengths of pipe. His whole idea, when there is extra work to do, is to hire extra men. He thinks of putting money into improvements as an expense. Farm products at their lowest prices are dearer than they ought to be. Farm profits at their highest are lower than they ought to be. It is waste motion—waste effort—that makes farm prices high and profits low.
On my own farm at Dearborn we do everything by machinery. We have eliminated a great number of wastes, but we have not as yet touched on real economy. We have not yet been able to put in five or ten years of intense night-and-day study to discover what really ought to be done. We have left more undone than we have done. Yet at no time—no matter what the value of crops—have we failed to turn a first-class profit. We are not farmers—we are industrialists on the farm. The moment the farmer considers himself as an industrialist, with a horror of waste either in material or in men, then we are going to have farm products so low-priced that all will have enough to eat, and the profits will be so satisfactory that farming will be considered as among the least hazardous and most profitable of occupations.
Lack of knowledge of what is going on and lack of knowledge of what the job really is and the best way of doing it are the reasons why farming is thought not to pay. Nothing could pay the way farming is conducted. The farmer follows luck and his forefathers. He does not know how economically to produce, and he does not know how to market. A manufacturer who knew how neither to produce nor to market would not long stay in business. That the farmer can stay on shows how wonderfully profitable farming can be.
The way to attain low-priced, high-volume production in the factory or on the farm—and low-priced, high-volume production means plenty for everyone—is quite simple. The trouble is that the general tendency is to complicate very simple affairs. Take, for an instance, an "improvement."
When we talk about improvements usually we have in mind some change in a product. An "improved" product is one that has been changed. That is not my idea. I do not believe in starting to make until I have discovered the best possible thing. This, of course, does not mean that a product should never be changed, but I think that it will be found more economical in the end not even to try to produce an article until you have fully satisfied yourself that utility, design, and material are the best. If your researches do not give you that confidence, then keep right on searching until you find confidence. The place to start manufacturing is with the article. The factory, the organization, the selling, and the financial plans will shape themselves to the article. You will have a cutting, edge on your business chisel and in the end you will save time. Rushing into manufacturing without being certain of the product is the unrecognized cause of many business failures. People seem to think that the big thing is the factory or the store or the financial backing or the management. The big thing is the product, and any hurry in getting into fabrication before designs are completed is just so much waste time. I spent twelve years before I had a Model T—which is what is known to-day as the Ford car—that suited me. We did not attempt to go into real production until we had a real product. That product has not been essentially changed.
We are constantly experimenting with new ideas. If you travel the roads in the neighbourhood of Dearborn you can find all sorts of models of Ford cars. They are experimental cars—they are not new models. I do not believe in letting any good idea get by me, but I will not quickly decide whether an idea is good or bad. If an idea seems good or seems even to have possibilities, I believe in doing whatever is necessary to test out the idea from every angle. But testing out the idea is something very different from making a change in the car. Where most manufacturers find themselves quicker to make a change in the product than in the method of manufacturing—we follow exactly the opposite course.
Our big changes have been in methods of manufacturing. They never stand still. I believe that there is hardly a single operation in the making of our car that is the same as when we made our first car of the present model. That is why we make them so cheaply. The few changes that have been made in the car have been in the direction of convenience in use or where we found that a change in design might give added strength. The materials in the car change as we learn more and more about materials. Also we do not want to be held up in production or have the expense of production increased by any possible shortage in a particular material, so we have for most parts worked out substitute materials. Vanadium steel, for instance, is our principal steel. With it we can get the greatest strength with the least weight, but it would not be good business to let our whole future depend upon being able to get vanadium steel. We have worked out a substitute. All our steels are special, but for every one of them we have at least one, and sometimes several, fully proved and tested substitutes. And so on through all of our materials and likewise with our parts. In the beginning we made very few of our parts and none of our motors. Now we make all our motors and most of our parts because we find it cheaper to do so. But also we aim to make some of every part so that we cannot be caught in any market emergency or be crippled by some outside manufacturer being unable to fill his orders. The prices on glass were run up outrageously high during the war; we are among the largest users of glass in the country. Now we are putting up our own glass factory. If we had devoted all of this energy to making changes in the product we should be nowhere; but by not changing the product we are able to give our energy to the improvement of the making.
The principal part of a chisel is the cutting edge. If there is a single principle on which our business rests it is that. It makes no difference how finely made a chisel is or what splendid steel it has in it or how well it is forged—if it has no cutting edge it is not a chisel. It is just a piece of metal. All of which