Stained Glass Work: A text-book for students and workers in glass. Christopher WhallЧитать онлайн книгу.
it is only just possible to get out by groseing, ought never to be resorted to, except for some very sufficient reason. A cartoonist who knows the craft will avoid setting such tasks to the cutter; but, unfortunately, many cartoonists do not know the craft. If people were taught the complete craft as they should be, this book would not have been written.
Here let me say that we cannot possibly within the narrow limits of it go thoroughly into all the very wide range of subjects connected with glass—the chemistry, the permanence, the purity of materials. With the exception of the practice of the craft, probably we shall not be able to go thoroughly into any one of them; but I shall endeavour to mention them all, and to do so sufficiently to indicate the directions in which work and research and experiment may be made, for they are all three much needed in several directions.
It becomes, for instance, now my task, in modifying the passage some pages back as I promised, to go into one of these subjects in the light of inquiries made since the passage in question was written; and I let it for the time being stand just as it was, without the additional information, because it gives a picture of how such things crop up and of the way in which such investigations may be made, and of how useful and pleasant they may be.
Here then let us have—
Through the agent for the wheel-cutter in England I communicated with the maker and inventor in America, and told him of our difficulties and perplexities over here, and chiefly with regard to two points. First, the awkwardness of the handle, which causes the glaziers here to use the tool bound round with wadding, or enclosed in a bit of india-rubber pipe; and, secondly, the bluntness of the "jaws" which hold the wheel, and which must be ground down (and are in universal practice ground down), before the tool can be sharpened.
His reply called attention to a number of different patterns of handle, the existence of which, I think, is not generally known, in England at any rate, and some of which seem to more or less meet the difficulties we experience, most of them also being made with malleable iron handles, so that fresh cutting-wheels can be inserted in the same handle. His letter also entered into the question of the actual dynamics of "cutting," maintaining, I think rightly, that a "cut" is made by the edge of the wheel (this not being very sharp) forcing the particles of the glass down into the mass of it by pressure.
With regard to the old-fashioned pattern of tool which we chiefly use in this country, the very sufficient explanation is that they continue to make it because we continue to demand it, a circumstance which, as he declares, is a mystery to the inventor himself! Nevertheless, as we do so, and, in spite of the variety of newer tools on the market, still go on grinding down the jaws of our favourite, and wrapping round the handle with cotton-wool, let us try and put this matter straight, and compare our requirements with the advantages offered us.
There are three chief points to be cleared up. (1) The actual nature of a "cut" in glass; (2) the question of sharpening the tool and grinding down of the jaws to do so; and (3) the "mystery" of our preference for a particular tool, although we all confess its awkwardness by the means we take to modify it.
(1) With regard, then, to the nature of a "cut" in glass I am disposed entirely to agree with the theory put forward by the inventor of the wheel, which an examination of the cuts under the microscope, or even a 6 diameter lens, certainly also tends to confirm.
What happens appears to my non-scientific eyes to be this.
Glass is one of the most fissile or "splittable" of all materials; but it is so just in the same way that ice is, and just in the opposite way to that in which slate or talc is.
Slate or talc splits easily into thin layers or laminæ, because it already lies in such layers, and these will come apart when the force is applied between them: but it will only split into the laminæ of which it already is composed, and along the line of the fissures which already exist between them.
Glass, on the contrary (and the same is true of ice, or for that matter of currant-jelly and such like things), appears to be a substance which is the same in all directions, or nearly so, and therefore as liable to split in one direction as in another, and is so loosely held together that, once a splitting force is applied, the crack spreads very rapidly and easily, and therefore smoothly and in straight lines and in even planes.
The diamond, or the wheel-cutter, is such a force. Being pressed on to the surface, it forces down the particles, and these start a series of small vertical splits, sometimes nearly through the whole thickness of the glass, though invisibly so until the glass is separated. And mark, that it is the starting of the splits that is the important thing; there is no object in making them deep, it is only wasted force; they will continue to split of themselves if encouraged in the proper way (see Plates IX. and X.). Try this as follows.
Take a bit of glass, say 3 inches by 2, and make the very smallest dint you can in it, in the middle of the narrowest dimension. You cannot make one so small that the glass will hold together if you try to break it across. It will break across in a straight line, springing from each end of the tiny cut. The cut may be only 1/8 of an inch long; less—it may be only 1/16, 1/32—as small as you will, the glass will break across just the same.
Why?
Because the cut has started it splitting at each end; and the material being the same all through, the split will go straight on in the direction in which it has started; there is nothing to turn it aside.
So also the pressure of the wheel starts a continuous split, or series of splits, downwards, into the thickness of the glass. No matter how small a distance these go in, the glass will come asunder directly pressure is applied.
Now, if you press too hard in cutting, another thing takes place.
Imagine a quantity of roofing-slates piled flat one on top of another, all the piles being of equal height and arranged in two rows, side by side, so close that the edges of the slates in one row touch the edges of those in the other row, along a central line.
Wheel a wheelbarrow along that line over the edges of both.
What would happen?
The top layer of slates would all come cocking their outer edges up as the barrow passed over their inner ones, would they not?
Now, just so, if you press hard on your glass-cutting wheel, it will press down the edges of the groove, and though there are no layers already made in the glass, the pressure will split off a thin layer from the top surface of the glass on each side in flakes as it goes along (Plate X., d, e).
This is what gives the noise of the cut, c-r-r-r-r-r-; and as the thing is no use the noise is no use; like a good many other things in life, the less noise the better work, much cry generally meaning little wool, as the man found out who shaved the pig.
But the wheel or the diamond is not quite the same as the wheel of the wheelbarrow, for it has a wedge-shaped edge. Imagine a barrow with such a wheel; what then would happen to your slates? besides being cocked up by the wheel, they would also be pushed out, surely?
This happens in glass. You must not imagine that glass is a rigid thing; it is very elastic, and the wedge-like pressure of the wheel pushes it out just as the keel of a boat pushes the water aside in ripples (Plate X., d, e).
All these observations seem to me to bear out the theory of the inventor, and perhaps to some extent to explain it. I am much tempted to carry them further, and ask the questions, why a penknife as well as a wheel will not make a cut in glass, but will make a perfectly definite scratch on it if the glass is placed under water? and why this line so made will yet not serve for separating the glass? and why a piece of glass can be cut in two (roughly, to be sure, but still cut in two) with a pair of scissors under water, a thing otherwise quite impossible?
But I do not think that the knowledge of these questions will help the reader to do better stained-glass windows, and therefore I will not pursue them.
(2) The question