Stained Glass Work: A text-book for students and workers in glass. Christopher WhallЧитать онлайн книгу.
soon disposed of.
If the tool is to be sharpened, the jaws must be ground down, whether the maker grinds them down originally or whether we do it. Is sharpening worth while, since the tool only costs a few pence?
Well, it's a question each must decide for himself; but I will just answer two small difficulties which affect the matter.
If grinding the jaws loosens the pivot, it can be hammered tight again with a punch. If sharpening wears out the oil-stone (as it undoubtedly does, and oil-stones are expensive things), a piece of fine polished Westmoreland slate will do as well, and there is no need to be chary of it. Even a piece of ground-glass with oil will do.
(3) But now as to the handle. I am first to explain the amusing "mystery" why the old pattern shown in fig. 1 still sells.
It is because the British working-man is convinced that the wheels in this handle are better quality than any others.
Is he right, or is it only an instance of his love for and faith in the thing he has got used to?
Or can it be that all workmen do not know of the existence of the other types of handle? In case this is so, I figure some (fig. 17). Or is it that the wheel for some reason runs less truly in the malleable iron than in the cast iron?
Fig. 17.
Certain it is that the whole trade here prefers these wheels, and I am bound to say that as far as my experience goes they seem to me to work better than those in other handles.
But as to all the handles themselves, I must now voice our general complaint.
(1) They are too light.
For tapping our heavy antique and slab-glasses we wish we had a heavier tool.
(2) They are too thin in the handle for comfort, at least it seems so to me.
(3) The three gashes cut out of the head of the tool decrease the weight, and if these were omitted the tool would gain. Their only use that I can conceive of is that of a very poor substitute for pliers as a "groseing" tool, if one has forgotten one's pliers. But (as Serjeant Buzfuz might say) "who does forget his pliers?"
The whole question of the handle is complicated by the fact that some cutters rest the tool on the forefinger and some on the middle finger in tapping, and that a handle the sections of which are calculated for the one will not do equally well for the other.
But the whole thing resolves itself into this, that if we could get a tool, the handle of which corresponded in all its curves, dimensions, and sections with the old-established diamond, I think we should all be glad; and if the head, wheel, and pivot were all made of the quality and material of which fig. 1 is now made, but with the handle as I describe, many of us, I think, would be still more glad; and if these remarks lead in any degree to such results, they at least of all the book will have been worth the writing, and will probably be its best claim to a white stone in Israel, as removing one more solecism from "this so-called twentieth century."
I shall now leave this subject of cutting for the present, and describe, up to about the same point, the processes of painting, taking both on to a higher stage later—as if, in fact, I were teaching a pupil; for as soon as you can cut glass well enough to cut a piece to paint on, you should learn to paint on it, and carry the two things on step by step, side by side.
CHAPTER III
Painting (elementary)—Pigments—Mixing—How to Fill the Brush—Outline—Examples—Industry—The Needle and Stick—Completing the Outline.
The pigments for painting on glass are powders, being the oxides of various minerals, chiefly iron. There are others; but take it thus—that the iron oxide is a red pigment, and the others are introduced, mainly, to modify this. The red pigment is the best to use, and goes off less in the firing; but, alas! it is a detestably ugly colour, like red lead; and, do what you will, you cannot use it on white glass. Against clear sky it looks pretty well in some lights, but get it in a sidelight, or at an angle, and the whole window looks like red brick; while, seen against any background except clear sky, it always looks so from all points of view. There are various makers of these pigments. Some glass-painters make their own, and a beginner with any knowledge of chemistry would be wise to work in that direction.
I need not discuss the various kinds of pigment; what follows is a description of my own practice in the matter.
To Mix the Pigment for Painting.—Take a teaspoonful of red tracing-colour, and a rather smaller spoonful of intense black, put them on a slab of thick ground-glass about 9 inches square, and drop clean water upon them till you can work them up into a paste with the palette-knife (fig. 18); work them up for a minute or so, till the paste is smooth and the lumps broken up, and then add about three drops of strong gum made from the purest white gum-arabic dissolved in cold water. Any good chemist will sell this, but its purity is a matter of great importance, for you want the maximum of adhesiveness with the minimum of the material.
Mix the colour well up with the knife; then take one of those long-haired sable brushes, which are called "riggers" (fig. 19), and which all artists'-colourmen sell, and fill it with the colour, diluting it with enough water to make it quite thin. Do not dilute all the pigment; keep most of it in a tidy lump, merely moist, as you ground it and not further wetted, at the corner of your slab; but always keep a portion diluted in a small "pond" in the middle of your palette.
Fig. 18.
How to Fill the Brush with Pigment.—Now you must note that this is a heavy powder floating free in water, therefore it quickly sinks to the bottom of your little "pond." Each time you fill your brush you must "stir up the mud," for the "mud" is what you want to get in your brush, and not only so, but you want to get your brush evenly full of it from tip to base, therefore you must splay out the hairs flat against the glass, till all are wet, and then in taking it off the palette, "twiddle" it to a point quickly. This takes long to describe, but it does not take a couple of seconds to do. You must have the patience to spend so much pains on it, and even to fill the brush very often, nearly for each touch; then you will get a clear, smooth, manageable stroke for your outline, and save time in the end.
Fig. 19.
How to Paint in Outline.—Make some strokes (fig. 20) on a piece of glass and let them dry; some people like them to stick very tight to the glass, some so that a touch of the finger removes them; you must find which suits you by-and-by, and vary the amount of gum accordingly; but to begin, I would advise that they should be just removable by a moderately hard rub with the finger, rather less hard a rub than you close a gummed envelope with.
Practise now for a time the making of strokes, large and small, dark and light, broad and fine; and when you have got command of your tools, set yourself the task of doing the same thing, copying an example placed underneath your bit of glass. You will find a hand-rest (fig. 21) an assistance in this.
Fig. 20.
It is difficult to give any list of examples suitable for this stage of glass, but the kind of line employed on the best heraldry is always good for the purpose. The splendid illustrations of this in Mr. St. John-Hope's book of the stall-plates of the Knights of the Garter at Windsor, examples of which by the author's courtesy I am allowed to reproduce (figs. 22-22A), are ideal for bold outline-work, and fascinatingly interesting for their own sake. In most of these there is not only excellent practice in outline, and a great deal of it, but, mixed with it, practice also in flat washes, which it is a good thing to be learning side by side with the other.
Fig. 21.
And here let me note that there are throughout the practice of glass-painting many methods in use at every stage. Each person, each firm of glass-stainers,